Sorry having issued with photos loading, so I opened a new thread to load more pics, hope this is ok to do

My MOC sealed Toltoys C3PO, back has a mm sticker on it



My MOC sealed Toltoys Stormtrooper


Sand People - New Zealand only produced small size kenner backer card with a pyramid bubble. This was a quirky card/bubble combination as far as I know only sold in New Zealand, most of the Toltoys 12 & 20 backs in New Zealand have a kenner card equivalent slightly smaller than its US counterpart, all of which had the same size tiered pyramid bubble attached upside down, in certain cases these cards even ran over into the first ESB cards issued. Very strange behaviour by the New Zealand branch of the Toltoys company when they already had toltoys card stocks/normal bubbles to use.....


Star Wars Toltoys toothbrush backer - front & back



New Zealand Yoda cardback / bubble - with NZ toltoys info on back




New Zealand Luke Bespin Cardback - with NZ toltoys info on back




Admiral Ackbar ROTJ card - POTF Yellow label - Myers price sticker


Greedo ROTJ Card - POTF Yellow label - Myers price sticker


Imperial Attack Base Playset - New Zealand Version - with colourful toltoys sticker on box


Toltoys Painting design book kit in box, front & back pics of box



New Zealand Death Star Playset with lift off lid


Toltoys Diecast Landspeeder


Toltoys Diecast X-Wing


Toltoys Diecast Tie Fighter


A small pile of toltoys boardgames hehe


A small pile of toltoys jigsaws


Toltoys Ben Kenobi, part attached original bubble


Toltoys Sealed MOC R2D2


Toltoys Han Solo part attached original bubble


Rebel Soldier - Hoth Battle Gear - ESB Toltoys card - Front/Back - survival kit offer



Leia - Hoth Outfit - ESB Toltoys Card - Front/Back - survival kit offer



Han Solo - Bespin Outfit - ESB Toltoys Card - Front/Back - Display Arena Offer



Imperial Commander - ROTJ card - NN Offer - Front

Thanks for clarifying the 'pyramid bubble' David that must be unique to NZ?. I'd only heard of the blank pop NZ R2 & C3PO. I don't think I've seen the colourful Toltoys logo either. Kenner do have slightly different sized cardbacks are all NZ cardbacks smaller? Any chance of a side by side comparison picture & a close up of the NZ info? I'm getting an overload of new information. Thank you, this is bloody fantastic

Yeah, this is great.

aussiejames wrote:

Thanks for clarifying the 'pyramid bubble' David that must be unique to NZ?. I'd only heard of the blank pop NZ R2 & C3PO. I don't think I've seen the colourful Toltoys logo either. Kenner do have slightly different sized cardbacks are all NZ cardbacks smaller? Any chance of a side by side comparison picture & a close up of the NZ info? I'm getting an overload of new information. Thank you, this is bloody fantastic

Hi James,
Whew well I'll try and answer to all your questions.

Yes NZ only - it was a quirk the local arm of Toltoys in New Zealand had, god only knows why. The only difference in the NZ version of the imperial attack base playset is the fact that there is a colourful sticker on the top corner of the box on one side, in every other respect it is the same as the australian one. All the Star Wars kenner cardbacks sold in NZ were smaller yes, and the card stock seems a little thinner, (at least all the ones I have are, and I have quite a few), when ESB cards started appearing on shelves the cardback resumed its normal kenner size and thickness, but a few of the pyramid style bubbles made there way onto these cards. I will defer the side by side for a while as have many more pics already taken to post, I will edit the post shortly & add a closeup pic of info which I have already taken. heehee isn't it fun, do you have a link to the blank pop pics? I would love to see them, I will have to go look at mine now to see if I have any, can't say as I ever looked at that specifically

"The only difference in the NZ version of the imperial attack base playset is the fact that there is a colourful sticker on the top corner of the box on one side, in every other respect it is the same as the australian one." I thought the aussie cardboard is a lot thicker (has the corrugations)
edit I did find some pyramid bubble pics:



& I may be getting confused with the blank POP- it's a circle price sticker? I know I have a pic somewhere.

aussiejames wrote:

"The only difference in the NZ version of the imperial attack base playset is the fact that there is a colourful sticker on the top corner of the box on one side, in every other respect it is the same as the australian one." I thought the aussie cardboard is a lot thicker (has the corrugations)
edit I did find some pyramid bubble pics:



& I may be getting confused with the blank POP- it's a circle price sticker? I know I have a pic somewhere.

Oh right I'll have to check that cardboard and see if thats the case - I wasn't aware of that

Do you mean like on the luke/yoda pics I just added on the cardbacks? it is printed on the cardback

I found the pic :

which looks to be the same as yours are there more than 2 MOC examples?

It looks like both the NZ & Aus imperial attack bases have the thicker cradboard than a Kenner version:

you can just see the corrugations of the cardboard

Wow!
Love your tt diecast stuff

Some awesome looking cardbacks you have there!



Jason

Apollo wrote:

Wow!
Love your tt diecast stuff

Thanks Apollo, once I hit 40 posts, I will probably set up a FS thread with some of my duplicate items, incl. a d/c landspeeder and a d/c tie-fighter, keep an eye out

mr_palitoy wrote:

Some awesome looking cardbacks you have there!



Jason

Thanks Jason, Once I hit 40 posts I will setup a FS thread and I will be listing my duplicate toltoys cardbacks, keep an eye out, Regards David

aussiejames wrote:

It looks like both the NZ & Aus imperial attack bases have the thicker cradboard than a Kenner version:

you can just see the corrugations of the cardboard

ok thanks for the info, I had thought they were pretty much the same

I would definately be interested in any Dengar related material you have excess of

aussiejames wrote:

I found the pic :

which looks to be the same as yours are there more than 2 MOC examples?

It would be very interesting to see if there was actually one of each figure to collect of these, that would mean there are probably a lot of these backs still to be found!

Josh wrote:

I would definately be interested in any Dengar related material you have excess of

I don't know that I have anything related to Dengar I found very little in the way of toltoys bounty hunters over the years, but if I turn up anything when I am going to my collection weeding things out I will let you know

Awesome.
1 post to go

I'd be interested in any cardbacks with the Aussie POTF coin offer on them m8.

Tank1252 wrote:

I'd be interested in any cardbacks with the Aussie POTF coin offer on them m8.

ok tank, will keep you in mind

starwarsrarities wrote:

mr_palitoy wrote:

Some awesome looking cardbacks you have there!



Jason

Thanks Jason, Once I hit 40 posts I will setup a FS thread and I will be listing my duplicate toltoys cardbacks, keep an eye out, Regards David

Cheers, here's what I have left to get:-

SW 12 Chewbacca
SW 12 Death Squad Commander
SW 12 Sand People
SW 20 Snaggletooth
SW 20 Walrusman

Jason

Congrats David, really enjoyed seeing this part two limelight The die cast are beauties. Also like the coloured logos on the Attack Base and the colouring set. Fun artwork on the back of the toothbrush card too!
I think your FS thread is going to be very popular! (wonders if he has any Luke XW or XWing Fighter related stuff )